xTool SafetyPro AP2 Max Air Purifier with SuperCyclone

C$3,288.69
C$3,638.69
SAVE 10%

Description

xTool SafetyPro™ AP2 Max Air Purifier with SuperCyclone System

Powerful fume, dust & odor filtration built for demanding workflows-keep your apparel printing, DTF powdering, and workspace clean and safe.

Available Options:

Key Features

  • SuperCyclone Separation: Centrifugal pre-filtering that captures large particles before they reach the main filters-extending filter life up to 10x.
  • Multi-Layer Filtration: 7-layer system (depending on version) removes fine dust (0.3 µm), PM2.5, VOCs, toluene and odors down to 99.97% + efficiency.
  • High Airflow Capacity: 700 m³/h for robust workshops.
  • Quiet & Smart Operation: Operates around 65 dB, has auto-on/off features, syncs with supported machines and material types for optimized performance.
  • Workshop-Ready Design: Includes wheels, magnetic filter door for quick changes, and hose port for exhaust or internal recirculation setups.

Specifications

  • Filtration Layers: 7
  • Airflow Rating: Up to ~700 m³/h
  • Noise Level: ~65 dB (quiet operation)
  • Control Modes: Touch button panel, 1-100% speed settings, optional wireless dongle for sync.

Why It Works for Your Apparel/DTF Setup

When operating a DTF apparel printing line (film printing, powder application, curing, pressing), you generate fine particulate dust (adhesive powder), inks and possible off-gassing from substrates and adhesives. The SafetyPro AP2 helps:

  • Maintain clean air free from powder haze-protecting operators, machinery optics and air quality.
  • Reduce sticky film path contamination by capturing overspray and airborne particles before they settle.
  • Ensure safer workspace compliance and better ventilation support, especially in indoor studios or shared spaces.

Installation & Setup Tips

  1. Place the AP2 near your powder or curing station to capture air before it disperses into the room.
  2. Connect exhaust hose if required-either vent to outside or recirculate filtered air indoors depending on local code.
  3. Turn on auto-mode if your printer supports synced operation-this suspends AP2 operation when machine is idle, saving runtime and filter life.
  4. Monitor filter status via panel or app; clean the cyclone pre-filter regularly for best performance.

Specifications

Item #: XT-AP2MAX-PURIFIER


WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment when working with specialty printing and curing products and processes (including DTF, DTG, UV) as fumes may be hazardous. Specialty inks and film require a good humidity and temperature environment ( > 50% humidity, and temp range 70° to 80°F) to minimize risk of ink clogs and film buckling)

Customer Reviews