Description
eSUN 3D Printer Filament: PLA PRO (PLA+)
PLA+ is like PLA, but better! As compared to PLA, PLA+ (PLA PRO) is:
- Several times stronger than standard PLA (printouts are very hard to break!)
- Superb layer bonding
- High rigidity
- Better glossiness
- Smoother finish
- No cracking or brittle problems
Specification: - 1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool
- eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding.
- 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
- Recommended Extrusion/Nozzle Temperature 205C - 225C
- Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"
- Extrusion Temperature Range: 205 to 225 Celsius
- PLA PRO (PLA+) print temperature is about 20 Celsius higher than regular PLA. Most users print at around 210 to 215 Celsius.
- PLA+ has a low shrinkage rate and sticks very well both to bed and layer to layer.
- PLA+ is a biological material, extracted and purified from corn grain, eco-friendly, odorless, and harmless to human.
This product is vacuum packed with a manual. It is not easy to absorb moisture and is ok for long-term storage. It absorbs slower and less moisture than standard PLA. WARNING: Luminous compound is abrasive to hotend. Always use all-metal hotend.
Specifications
Item #: ESUNPLAPLUSBK
